de Havilland Beaver kit For E-Power

Designed for the GWS EPS 350 w/GB for wheel & trainer version or add a Himax 2812 for using ail, flaps, and floats.

The Beaver is a very well thought out kit which has over 250 laser cut parts for the float version, and very good building instructions.

Full house 5 channel control, sheeted fuse, a laser cut float kit or short kit will be included in the kit for those who like float flying. All balsa/lite ply construction, building guide/construction sequence on plans. This kit is intended for the average builder who has a few kits under his/her belt.

Being sold as a short kit or full kits minus hardware. A list of required wood will also be included, as well as motor/battery/ESC/prop recommendations. 

BOTH LAND AND FLOAT VERSIONS HAS THE LASER CUT PARTS TO BUILD IN THE AIL & FLAPS

Full Wood kit Float version Price:

$130.00

Laser cut parts and wood necessary to build the Beaver. No hardware pkg.

Short kit Float version Price:  

$100.00 

Laser cut short kit with laser cut float short kit. Over 250 laser cut parts.

Full wood kit Wheel Version Price:

$115.00

Laser cut parts and wood necessary to build the Beaver. NO Landing gear provided and no hardware pkg.

Short kit Wheel version Price: 

 $90.00 Laser cut short kit. Over 200 laser cut parts.

 The Beaver kit does not include alum landing gear at this time the gear is shown full size on the plans. However we will offer a gear at a later time as soon as we get a reliable source.

BOTH LAND AND FLOAT KIT VERSIONS HAVE THE LASER CUT PARTS TO BUILD IN THE AIL & FLAPS

Length: 31.25", Height 12.5", Span: 48.25", Wing area 257 sq"  32oz AUW W/Floats

Float version:

We even added holes in the LE ribs to make adding navigation lights a breeze.

Production kits will be built with the LE sheeting: We omitted the sheeting  just to show as an example of the construction.

Wheel version:

Picture of the laser cutting for the Beaver. All balsa/lite ply no foam is used in the build.