The model is a semi-scale version of the full size diminutive racing aircraft. Construction is of all balsa and plywood, laser cut for accuracy and convenience. Power is provided by a .15 to .25 cu in two stroke engine. The .15 gives good sporty performance while the .25 will give "rocket" type performance. Control is provided from a standard 4 channel radio. Servo installations can be either the mini or standard size servos and battery.

The model is 38 1/2 inch wingspan.

A wrap around windshield will allow those of your who enjoy detailing to install a cockpit interior. Of course, as a minimum, a pilot head and shoulders in the cockpit is required to give the impression that there is someone flying the 'plane!

There is plenty of room in the fuselage for any radio installation you wish and the detail of the one used in the prototype is provided for reference. The fuselage narrows at the tail but leaves enough room for pushrods and adjustments as necessary. Wheel pants are provided and give the model that finished look.

Formally kitted by KAM out of Canada.

Kit Contents

Laser cut balsa and plywood parts
Crystal clear windshield material
Built up wings
Dowel pushrods
Flexible throttle pushrod
Detailed Instruction Manual and plans
Vacuum formed wheel pants and cowl cheeks
No Hardware is included
View our building manual HERE

CASSUTT KIT

$60.00

CASSUTT PLANS & BUILD MANUAL ONLY

$25.00